STANDARD FEATURES:

Dual operator allows for two operators to work at the same time at full capacity

85-ton punch station (1-1/16" in 1")

Keyed punch ram for safety

14" throat depth

Punch gauging table with fence and scale

Die holder complete with 2" die insert

Punch nut with wrench & stripper

Adjustable swing-away stripper

One round punch & die: max. diameter 1-1/4"

Punch jog control

Two adjustable electric stroke controls with scale

Two electric remote foot pedals

Two 2-stage hydraulic pumps

Two valves

6" x 6" x 1/2" slug-less angle shear

Built-in rectangle notcher: 2" x 4" x 1/2" can be converted to 3" x 3" V-notcher,

 50-ton punch station, and 6" open end brake

20" flat bar shear

Shear table with miter fence

Rod shear: 1/2", 3/4", 1", 1-1/2" round and 1-1/2" square

Slug receptacles

Electrical box supplied with emergency palm button and lock-out tag-out accommodations

230/460 volt/3-ph electrics (must specify voltage)

All guards necessary to comply with ANSI B 11-5 standards

Forklift accommodations

Three-year warranty on parts

 

CAPACITIES AND SPECIFICATIONS:

RATED ON A36 MILD STEEL/65,000 PSI TENSILE

 

Punching capacity .................................. 85 ton (77 mt)

                  .................................. 1-1/16" in 1" (27 mm in 25 mm)

Special tooling .................................... 4" max. dia. (200 mm max. dia.)

Throat depth ....................................... 14" (350 mm)

Flat bar shear     ................................. 20" length (500 mm)

                   ................................. 1" x 16" (25 x 400 mm)

                   ................................. 3/4" x 20" (19 x 500 mm)

Angle shear

 90 degrees ........................................ 6" x 6" x 1/2" (150 x 150 x 13 mm)

 45 degrees (w/Bar shear) .......................... 4" x 4" x 1/2" (100 x 100 x 13 mm)

Brake 12" .......................................... 85 ton (77 mt)

Brake 24" .......................................... 85 ton (77 mt)

Open end brake ..................................... 5" x 5/8" (125 x 16 mm)

Pipe notcher ....................................... 3/4", 1" (19 mm, 25 mm)

Schedule 40  ....................................... 1-1/4" (32 mm)

             ....................................... 1-1/2", 2" (38 mm, 50 mm)

90 degree V-notcher (punch station) ................ 6" x 6" x 5/16" (150 x 150 x 8 mm)

Rectangle notcher .................................. 2" x 4" x 1/2" (50 x 100 x 13 mm)

 90 degree V-notcher (notcher station) ............. 3" x 3" x 1/2" (75 x 75 x 12 mm)

 Punch attachment for notcher station .............. 50 ton, 1-1/4" in 1/2" (32 mm in 12 mm)

 Throat depth w/punch attachment ................... 4-7/16"

Channel shear ...................................... 2" to 6" (50 mm to 150 mm)

Strut shear ........................................ samples required

Rod shear

 Round rod (max.) .................................. 1/2", 3/4", 1", 1-1/2" (13 mm, 19 mm, 25 mm, 38 mm)

 Square rod (max.) ................................. 1-1/2" (38 mm)

Square tube shear .................................. 1/2" to 2", 12 gauge (12 mm to 50 mm, 2.75 mm)

Picket tool ........................................ 1/2", 3/4", 1" (13 mm, 19 mm, 25 mm)

            ........................................ 16 gauge (1.6 mm)

Offset die holder .................................. Max. 40 ton (36 mt)

Strokes per minute

 In light material ................................. 48 spm (1/4" stroke) [punch station]

 In heavy material ................................. 20 spm (3/4" stroke) [punch station]

Hydraulics ......................................... 3,350/3,800 psi (231/262 bar)

 

Motor

 Standard .......................................... 10 hp 3 ph (7.46 kW) 230/460/208/380/575v

 Optional .......................................... 10 hp 1 ph (7.46 kW) 230v

 

Dimensions ......................................... 70" L x 30" W x 77" H

           ......................................... (178 cm x 76 cm x 196 cm)

 

Shipping weight .................................... 5,504 lbs. (2,496 kg)

 

OPTIONAL STANDARD TOOLING (CALL FOR PRICING):

12" & 24" brake

Open end brake

Pipe notcher

90 degree V-notcher

Tube shear

Picket tool

6" x 6" die holder

Offset die holder

Urethane stripper

Open end brake for notcher end

Strut shear

Channel shear blades

Optional punch for notcher end

Punch slug receptacle

Punch table extension

48" back gauge

Brake length gauge with scale (12" & 24" brakes)

Brake table with scale & squaring arm (12" & 24" brake)

Multi-loc punch gauging table (36" & 85" extensions)

24" x 5 conveyor with angle iron support