10" X 24" BROWN & SHARPE UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
MODEL: 1024U S/N: 521-1024-325
NEW: 1986 - REBUILT FOR THE GOVT IN 1992 BY BROWN & SHARPE
** FULL AUTO CYCLE (PICK, PLUNGE, RAPID, SPARKOUT TIMER)**
SWING OVER TABLE ............................. 10"
DISTANCE BETWEEN CENTERS, NOMINAL .............. 24"
DISTANCE BETWEEN CENTERS, MAXIMUM .............. 26-3/4"
WHEELHEAD SPINDLE SPEEDS (3) ................. 2100, 2400 & 2800 RPM
GRINDING WHEEL SIZE ............................ 12" X 1" X 5"
MINIMUM GRINDING WHEEL WIDTH ................... 3/8"
SWIVEL AT THE WHEELSLIDE ....................... 90 DEGREES EITHER WAY
WHEEL SPINDLE SWIVELS .......................... 90 DEGREES EITHER WAY
INFINITELY VARIABLE SPINDLE SPEEDS ........... 60 TO 600 RPM
HEADSTOCK SPINDLE NOSE TAPER ................... A2-5"
HEADSTOCK SWIVELS EITHER SIDE OF ZERO .......... 90 DEGREES
INFINITELY VARIABLE TABLE SPEED .............. 3" TO 150" IPM
TABLE PER REV. OF HANDWHEEL:
SLOW ........................................... 0.1"
FAST ........................................... 1.5"
DWELL AT EACH OR ALTERNATE TABLE REV. .......... 0 - 2-1/2 SEC.
TABLE SWIVEL, SCALES FOR ANGULAR SETTING ....... 8-1/4 DEG.
SCALES-TAPER PER FT. ........................... 3-1/2"
MAX. TRAVEL OF WHEELSLIDE .................... 5"
CROSSFEED HANDWHEEL GRAD. ...................... 0.00002"
AUTOMATIC CROSS FEED, REDUCTION IN DIAMETER
OR WORK AT EACH OR ALTERNATE REVERSALS ....... 0.0001" - .003"
HAND FEED PER REV. OF HANDWHEEL:
SLOW ........................................... 0.1"
FAST ........................................... 0.3"
TAILSTOCK SPINDLE TAPER .......................#7 JARNO
TAILSTOCK SPINDLE TRAVEL ....................... 5/8"
APPROXIMATE WEIGHT ........................... 5,100 LBS
MACHINE FEATURES:
DUAL RIGHT OR LEFT END WHEEL MOUNTING
SWIVELLING AT WHEEL SPINDLE HEAD OR AT THE WHEEL
SLIDE PERMITS ANY COMPOUND SETTING REQUIRED IN
COMBINATION STRAIGHT AND TAPER GRINDING,
EXTERNAL OR INTERNAL.
INFEED HANDWHEEL GRADUATED TO READ TO 0.000020"
HYDRAULIC TABLE TRAVERSE
AUTO INFEED OF WHEELHEAD @ TABLE REVERSALS
AUTO PLUNGE INFEED
POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER
ADJUSTABLE TABLE DWELL
SELF-CONTAINED HYDRAULIC SYSTEM
OIL CHILLER UNIT (FAN COOLED)
EQUIPPED WITH:
SWING DOWN INTERNAL GRINDING ATTACHMENT WITH B & S I.D. SPINDLE
DUAL DEAD/LIVE HEADSTOCK SPINDLE
COOLANT SYSTEM
"GENESIS" SINGLE AXIS DIGITAL READOUT DISPLAY
EXTRA O.D. GRINDING WHEELHUB & GRINDING WHEEL
STEADY REST SUPPORTS
MOTORS ARE 3/60/230-460 VOLTS
MACHINE IS PRESENTLY WIRED FOR 460 VOLTS
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
**SUPERIOR CONDITION; LOW HOURS FROM DEFENSE CONTRACTOR **
CONTACTO 
