K.O. LEE "DAKOTA" SERIES
UNIVERSAL TOOL & CUTTER GRINDER
MODEL: B6062 S/N: 21550-NE NEW: 1982
SWING OVER TABLE ........................... 12-1/4"
DISTANCE BETWEEN TAILSTOCKS ..................... 32"
TABLE WORKING SURFACE .............. 5-1/4" X 37-1/4"
SUB TABLE .................................. 8" X 48"
LONGITUDINAL TABLE TRAVERSE ..................... 20"
TABLE FEED PER REV. OF HANDWHEEL:
FAST ....................................... 2-13/16"
SLOW .......................................... 9/16"
CROSS FEED ....................................... 8"
FEED PER REV. OF HANDWHEEL (.001" GRAD.) ,,... 0.100"
VERTICAL MOVEMENT OF COLUMN ................. 10-1/2"
FEED PER REV. OF HANDWHEEL (.001" GRAD.)...... 0.050"
COLUMN DIAMETER .................................. 6"
MINIMUM/MAXIMUM DISTANCE CENTERLINE OF WHEEL
SHAFT TO TABLE ......................5-3/8" / 15-1/4"
MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
OF STRAIGHT WHEEL; DOVETAIL SLIDE NOT EXTENDED,
SPINDLE 90 DEG. TO TABLE .................... 6-3/8"
MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
OF STRAIGHT WHEEL; DOVETAIL SLIDE EXTENDED,
SPINDLE 90 DEGREES TO TABLE ................ 11-1/2"
TABLE SWIVELS (CALIBRATION: 3" PER FT.,
15 DEG. EITHER SIDE OF CENTER) .......... 225 DEGREES
WHEEL HEAD SWIVEL ........................ 360 DEGREES
MAXIMUM I.D. DEPTH, HOLE SIZE 9/32" TO 2" ..... 3-1/2"
MAXIMUM CROSS FEED SURFACE GRINDING W/8" WHEEL..... 5"
SPINDLE SPEED RANGE
(HEAVY DUTY WHEELHEAD) .............. 2840 TO 5330 RPM
APPROXIMATE MACHINE WEIGHT ................. 1,300 LBS
EQUIPPED WITH:
K.O. LEE MOTORIZED WORKHEAD WITH 5C COLLET DRAW BAR,
WITH HIGH SWING FOR THE DAKOTA SERIES MACHINE (12-
CONTACTO 
