| Estatus: | CERRADO | | Id# | 16514 | | Ref: | 9671 | | Nombre: | 440 Ton x 20 Durma Model: AD-S 60400 Press Brake, Mfg:2006 | | Fabricante: | DURMA | | Modelo: | DELEM CNC | | Año: | 2006 ( Usado ) | | Localización: | USA | | Precio: | On Request | | | | |
|---|
| Descripción: | 440 Ton x 20 Durma Model: AD-S 60400 Press Brake w/Delem Multi-axis CNC Back Gauge Mfg: 2006
We have European tooling and holders. 1/8 punch goose neck. 1/8 punch. 3/8
punch. 3/4 punch. All punches are 2 long = 20.
4-way v die. 1, 2.5, 4 and 6.
Specifications:
Tons: 440
Bed Length: 238
Between Columns: 200
Y Rapid Speed: 236 IPM
Y Working Speed: 19 IPM
Y Return Speed: 189 IPM
Open Height (bed to ram): 25
Table Width: 12
Table Height: 48
Stroke: 14.4
Throat Depth: 20
X Axis Speed: 827 IPM
X Axis Travel:30 IPM
R Axis Speed: 12 inches/second
R Axis Travel:10 inches/second
Main Motor: 50 HP
Oil Capacity: 132 gallon
Dimensions: 27.7 L x 19 W x 12.4 H
Weight: 90,390 Lbs.
Standard Equipment
-Large Stroke-Daylight-Throat
-Y1,Y2 Ram Positioning
-Delem DA 66 Graphic Control
-Euro/American Style Punch Clamp
-X/R Back Gauge
-Quickset Sliding Front Sheet Support
-Automatic Table Crowning
-Rear Work Light
-Side and Rear Safety Doors
LOWER DEFLECTION & LONGER LIFETIME
Durmas high engineering standards minimize stress and deflection.
All mainframe components ( side frames, ram, bed) are designed with built in
safety factors.
All Durma machines are constructed from st44-2 steel.
Acceptable industry stress standards for material is 8,5 kg/mm2 stress.
All Durma machines must meet a value of 5-6 kg/mm2 .
These strict standards reduce deflection and increase frame durability
and the ability to hold tolerances over long periods of heavy use.
All incoming plate must be certified the Durmas standards and requirements.
Durmas high frame rigidity and robustness provides long-term accurate
bending.
Y1, Y2 PRECISION & FLEXIBILITY
In the ADS Series Y1, Y2 ram positioning system each
cylinder operates independently in a closed loop system.
Linear encoders combined with precision hydraulic valves
and the CNC command center, provide .0004 accuracy
and the ability to program all ram position, speeds and ram
tilt.
Application advantages include:
-Stage or Progressive Bending
-Fade Out or Conical Work
-Enhanced Material Handling with Total Ram Control
OVERSIZED RAM GUIDES
Long rectangular shaped guides assure stable, smooth,
and secure ram positioning. Conventional machines can
typical have these guides mounted on the inside of the
frames resulting in obstructions to full length acute angle
bends.
X/R STYLE BACK GAUGE
With the X/R style back gauge, the height of the back
gauge is programmable in addition to the depth. This is
very useful for changes in die height, extreme crowning
settings, and for gauging to a flange that may be a different
height than the die. |
|---|
|
|---|
| |
| |
|
|
|
|
|
|
Que aparecen en esta página 440 Ton x 20 Durma Model: AD-S 60400 Press Brake, Mfg:2006 tiene la condición de "CERRADO", lo que significa que el presente anuncio de venta ya NO es válido.
Sin embargo, con la tecla "CONTACTO con el Vendedor", usted puede pedir al vendedor, que podría tener que vender DURMA DELEM CNC.
Si usted no puede encontrar la máquina que está buscando -
suscribirse a la MachineKs.com y lugar GRATIS Anuncio de compra.
Si usted tiene equipo para la venta - el categoría Prensas del freno, CNC junto con una DURMA DELEM CNC en la lista, es sólo una entre cientos de otros, donde en pocos minutos publique sus anuncios de venta. |
|---|
|
|
|
CONTACTO 
