| Estatus: | CERRADO | | Id# | 14465 | | Ref: | 142833 | | Nombre: | 14Inch Swing 40Inch Centers Karsten K28 ID/OD CNC OD GRINDER, INTERNAL-EXTERNAL C | | Fabricante: | Karsten | | Modelo: | K28 ID/OD | | Año: | 1998 ( Usado ) | | Localización: | USA | | Precio: | $0.00 | | | | |
|---|
| Descripción: | 14Inch x 40Inch KARSTENS CNC UNIVERSAL I.D./O.D.
CYLINDRICAL GRINDER
MODEL: K28, S/N: 97 023 1028 041 MFG.: 1998
FOR EXTERNAL/INTERNAL GRINDING WITH CONTINUOUS PATH CONTROL
EQUIPPED WITH PROGRAMMABLE InchBInch & InchCInch AXES OPTIONS
TECHNICAL DATA AND FEATURES:
Swing: 14Inch
Distance between Centers: 40Inch
Grinding length: 40Inch
Max.dia. to be ground: 13.5Inch
Electrics: 230/460 Volt
3 phase,60Hz
Total installed power with 10 HP spindle motor: 14.5 HP
Net weight of machine, approximately: 10,400 Lbs.
WHEELHEAD:
Grinding Wheel arrangement left hand
Spindle in anti-friction bearings, life time lubricated.
Grinding wheel dia.: 20Inch
Grinding wheel width, up to: 4Inch
Grinding wheel bore: 5Inch
Spindle Motor: 10 HP
Grinding wheel speed 7000 sfpm
Coarse adjustment of wheelhead on air cushion,
clamping with spring-load, unclamping pneumatically
(no hand tools required). Manually swivelling of wheelhead
after unclamping by operating one lever.
WORKHEAD:
Live and dead spindle in anti-friction bearings.
Spindle taper: MT#4
Spindle bore-front: 2-1/2Inch
Spindle thru bore: .945
Work drive infinitely programmable 25-600 RPM
Workhead can be swiveled on base plate
TAILSTOCK:
On air cushion adjustable
Spindle taper MT#4
Stroke: 1-3/4Inch
Manual quill retraction.
Spring tension adjustable up to: 176 lbs.
DRESSING DEVICE
Holder for the dressing tool for diamond with shaft MT 0
or diamond dressing blade, (without diamond).
KARSTENS-CNC CONTROL TYPE BWO 900
Modular designed continuous path control
in powerful RISC-processor technology.
Axis interpolation possible in different software channels
Comfortable operation guidance by integrated function keys,
softkeys and data input by numerical key board.
Color-LC-Display, VGA graphic mode
Approaching cycles for automatic setting of reference
points, with lateral locator device,
for dressing and grinding cycles.
CNC programming in accordance to DIN 66025 via keyboard
or data in-and output via serial interface (RS232C).
STANDARD ACCESSORIES:
Wheel guard for grinding wheels up to 4Inch wide,
Wheel drive for 7000 sfpm,
Grinding wheel flange with grinding wheel 20Inch dia.
x 1-1/2Inch wide x 5Inch bore,
Balancing arbor and extractor screw for wheel flange.
Fine setting device for upper table, including dial
indicator,
1 Set of carbide tipped centers MT No. 4,
1 Set of tools for machine
1 Instruction/service manual, complete with parts list
Equipped with:
WHEELHEAD BASE
B-axis
Angle Position Programmable
Drive System Brushless AC servo motor
Measuring system Encoder
Resolution 0.0001 degree
Workpiece spindle as C-axis,
interpolation with another main axis
Encoder Heidenhain
36,000 impulses per revolution
Resolution .018 degree
Wheel guard for second grinding wheel (right side)
with coolant supply.
to accomodate grinding wheels 16Inch x 3.150Inch x 5Inch
grinding wheel wear down to 12Inch possible. This would
offer the option to have a wheel in degrees for
face grinding... grinding length 26Inch
Rear mounted internal grinding attachment,
motor rating 3 HP
Spindle mount for dia. 3.150Inch x 6.300Inch
with reductions for dia. 2.362Inch
and coolant supply,
Internal grinding spindle type UJ 60 x 250R
(Grease lubricated),
including operating tools and drive belts
with 1-1/2Inch dia. pulley, 15,900 RPM,
3 grinding arbors,
and 3 threaded bolts for mounting grinding
stones 1Inch, 1-3/16Inch and 1-1/2Inch dia.
one collet clamping arbor with one collet
1/4Inch dia
Second dressing device, essential to fully
cover machine range
Wheel mounted for wheel dia. 20Inch or 16Inch
clamping width 1-3/16Inch to 3.150Inch, bore 5Inch
Shock absorbing leveling pads
Automatic Paper Band Filter Unit
Tank volume 82 gal.
Filter capacity 36 gal./min.
Voltage stabilizer 750 VA for CNC Control
system to compensate fluctuations in the mains
exceeding +/- 10%
Halogen work light 70 watt/24 volt, including
transformer and mounting bracket
Operating Satellite for Karstens CNC Control BWO
** Inspect Under Power in Farmingdale, N.Y. (45 Minutes
from JFK Intl Airport, Laguardia Airport or Islip
MaCarthur Airport)
** Superb Condition & Appearance **
|
|---|
|
|---|
| |
| |
|
|
|
|
|
|
Que aparecen en esta página 14Inch Swing 40Inch Centers Karsten K28 ID/OD CNC OD GRINDER, INTERNAL-EXTERNAL C tiene la condición de "CERRADO", lo que significa que el presente anuncio de venta ya NO es válido.
Sin embargo, con la tecla "CONTACTO con el Vendedor", usted puede pedir al vendedor, que podría tener que vender Karsten K28 ID/OD.
Si usted no puede encontrar la máquina que está buscando -
suscribirse a la MachineKs.com y lugar GRATIS Anuncio de compra.
Si usted tiene equipo para la venta - el categoría CNC Universal Cylindrical Grinders junto con una Karsten K28 ID/OD en la lista, es sólo una entre cientos de otros, donde en pocos minutos publique sus anuncios de venta. |
|---|
|
|
|
CONTACTO 
